Researchers at The University of Manchester and TWI have discovered ways of using graphene to prolong the lifetime of pipes used in the oil and gas industry. The team has designed a way of incorporating graphene into a polymer liner used in pipes that transport crude oil and gas from the sea floor. This technology has the potential to extend the life of the underwater pipework and therefore reduce the time between repairs.
Such pipes are generally made of internal layers of polymer or composite and external strengthening steel. Within these pipes, fluids may be at very high pressure and elevated temperature. In situations where carbon dioxide (CO2), hydrogen sulfide (H2S) and water permeate through the protective barrier layer of the pipe, the steel may corrode causing the pipe to lose strength over time, leading to a risk of catastrophic failure.
The researchers found that if the graphene was mechanically mixed with the plastic, or if a single layer of graphene were applied, gases were still able to pass through. However, by laminating a thin layer of graphene nanoplatelets to polyamide 11 (PA11) - a plastic often used in these linersâthe team were able to produce structures that behave as exceptionally good barriers.
The multi-layered laminate structures were tested at 60oC and at pressures up to 400 times atmospheric pressure, and were shown to reduce CO2 permeation by over 90% compared to PA11 alone, while permeation of H2S can be reduced to undetectable levels.
Professor Peter Budd, who led the Manchester team, said: "Graphene has many amazing properties, but it is not always easy to realize them on a large scale. Our work represents an important step in taking graphene out of the laboratory and into the real world."