Paragraf has entered into a working partnership with the Magnetic Measurement section at CERN, the European Organization for Nuclear Research, to demonstrate how new opportunities for magnetic measurements are opened up through the unique properties of its graphene sensor, particularly its negligible planar Hall effect.
The Magnetic Measurements section at CERN is in charge of testing magnets for these accelerators using the latest-available techniques and instruments. High precision and reliable measurements are performed for many of CERNâs ongoing projects, and therefore the team is always on the lookout for new sensors and transducers for improving their measurement methods and accuracy.
CERN operates the largest particle accelerators in the world, for example its 27-km long, Large Hadron Collider (LHC). Physicists examine how the world is built at the fundamental level by colliding sub-atomic particles in particle accelerators that rely on large numbers of normal and superconducting magnets to steer and focus the particle beam to their collision points.
Simon Thomas, CEO at Paragraf commented: âThis collaboration with CERN demonstrates the potential of graphene-based Hall effect sensors to improve accuracy in magnetic measurement applications. Our Hall effect sensors address key challenges CERN is facing in mapping magnetic fields, namely: highly accurate measurements of local field distributions in accelerator magnets, while eliminating artefacts and reducing uncertainties stemming from the sensors.â
Existing Hall effect sensors all exhibit planar Hall effects where field components which are not perpendicular to the sensing plane produce false signals. This is because the sensing layer is effectively three-dimensional, with some amount of depth. These false signals, together with the non-linear response to the field strength, increase the measurement uncertainty and thus limit the application of Hall sensors. Separating the true signals from the systematic errors is a complex and time-consuming process.
The Hall effect sensor by Paragraf reportedly solves these problems because the active sensing component is made of atomically thin graphene, which is therefore two-dimensional, and hence only senses magnetic fields along one direction - giving a negligible planar Hall effect. This enables the true perpendicular magnetic field value to be registered, allowing for higher precision mapping of the local magnetic field.
âUsing Hall effect sensors without planar effect would open the door to a new mapping technique by mounting a stack of sensors on a rotating shaft. The compelling advantage would be measurements of the harmonic content in accelerator magnets almost point-like along the magnet axisâ, commented Stephan Russenschuck, head of the magnetic measurement section at CERN.
One of the other key properties of Paragrafâs Hall effect sensor is its wide temperature range from +80Â°C down to cryogenic temperatures of 1.5 Kelvin. For CERN, this means that fields inside the superconducting magnets could be measured with high accuracy, using sensors operating in liquid helium temperature ranges (below -269 Â°C, 4 Kelvin, -452 Â°F) where the calibration of sensors is less than trivial.
CERNâs Magnetic Measurement section is looking to perform more in-depth tests on the Hall effect sensors, with the eventual aim of using them to build a novel mapping system for magnetic fields.
Paragraf and CERN will also be releasing a joint white paper communicating the work to date in more detail and showcasing the lack of planar Hall effect in Paragrafâs sensors, as well as detailing its high performance across a range of magnetic fields.